General Introduction
This Automatic Rapid Kinematic Viscometer is used to measure the kinematic viscosity of transparent and opaque liquids, including crude oil, light and heavy fuel oils, lubricating oils, additives, waste oils, residual oils, etc.
It quantitatively determines the kinematic viscosity of various Newtonian fluids at any temperature from 20°C to 100°C, and can calculate the viscosity index.
The instrument features automatic cleaning, automatic drying and automatic result calculation, with micro-volume detection, saving labor and consumables, and delivering fast testing speed.
Features
1.Controlled by a single-chip microcomputer with color touch screen display, stable and reliable.
2.Fast measurement: results available in 30 seconds, generally within 3–5 minutes.
3.User-friendly human-machine interface for easy operation.
4.High degree of automation: measurement, cleaning, drying and result calculation are fully automatic.
5.Efficient and low-cost cleaning: cleaning solution consumption is generally less than 10 mL per cycle.
6.Dual over-temperature protection (software & hardware), over-temperature alarm and dry-heating prevention function.
7.Low sample volume required: less than 1 mL.
8.Test results are highly consistent with standard methods GB/T 265 and GB/T 11137.
9.The test process fully meets national standard requirements with reliable data.
10.Capable of calculating viscosity index.
11.Tri-color indicator lights for working status prompt.
12.Multi-point temperature calibration function available.
The Technical Specifications and Parameters
| Model |
AIC-7279 |
| Applicable Standards |
ASTM D7279;ASTM D445 |
| Viscosity Measuring Range |
0.5 ~ 3000 mm²/s (selectable viscometer tube according to viscosity range) |
| Temperature Control Range |
20 ~ 100℃ (external cooling source required at 20℃) |
| Temperature control accuracy |
±0.02℃ |
| Measuring unit |
2 Units |
| Timing Accuracy |
±0.01 s |
| Test Accuracy |
≤0.68% |
| Heating Method |
Spiral electric heater |
| Display |
Color touch screen |
| Control Mode |
Automatic measurement, cleaning and drying |
| Data Storage |
1000 groups of test results |
| Power Supply |
AC220 V ±10%, 50Hz |
| Total Power |
1500W |
| Dimensions |
400mm×200mm×480 mm |
| Net Weight |
17KG |
FAQ
1.What's the delivery time?
About 40days.
2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.
3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support.
4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD280/Day for every person.
